59
Camera
5 Check Enable Motion Detection to enable motion detection or un-check to disable.
6 Adjust the S
ensitivity slider to configure motion detection sensitivity.
Select camera
Enable motion detection
Adjust motion detection senstiivity
7 In the image area, configure motion detection areas:
• Areas where the grid is filled in are enabled for motion detection.
• Click and drag to enable/disable areas of the screen for motion detection.
• Click Full Screen t
o enable the entire area for motion detection.
• Click Clear
to disable the entire area for motion detection.
Click and drag to enable/
disable motion areas
Enable whole screen
Disable whole screen
8 Click Apply to save changes. Right-click repeatedly to return to live view.
Configuring Motion Detection Alarm Settings
You can configure the alarm actions that occur when motion detection is triggered.
To configure motion detect
ion alarm settings:
1 Right-click and click Menu.
2 Enter the system user name (default: ad
min) and password (default: 000000) and click Yes.
To Next Page
Loading...
Need help?
General