22
Recording
Using the Intercom
Use the Intercom feature for two-way
communication between the LCD
receiver and the camera. Talk the
person at the camera from behind
closed doors for added security.
NOTE: Please make sure the camera(s)
is pr
operly connected prior to
using the Intercom.
To use the Intercom:
1 Press and hold the TA
LK button on the
back of the LCD receiver. An audio icon
appears on-screen.
2 Talk in a normal speaking voice close to
the LCD screen (approximately 12 in. / 30
cm).
3 Release the TA
LK button to hear a
response from the camera(s).
Two-Way Audio Volume
The two-way audio volume is different
from the alarm/buzzer volume found in
the Main Menu (Main
Menu>Settings>Alarm Volume). Use
the volume buttons on the remote
control to change the volume for
two-way audio.
To change two-way audio volume:
1 F
rom live viewing, press the Vol+ butt
on to
increase system volume.
2 Press the Vol-
button to decrease system
volume.
Use the white volume icons on the
on-screen
display to help you set the
volume for two-way audio.
To Next Page
Loading...
