60
Frequently Asked Questions
Screen Saver (Picture Frame Simulation)
Q: Can I upload my own pictur
es onto the LCD receiver?
A: The receiver does not offer the ability to upload your own
pictures/videos. It only displays
the pre-loaded images (five scenery images).
Q: Can I set the LCD receiver to play the pre-loaded images in a slideshow?
A: The LCD receiver will only display the pre-loaded image selected in the
OSD menu. To
change the image, please go to the OSD menu, and select another pre-loaded image.
Q: Can I delete the screen saver images?
A: No. The images are pre-loaded into the monitor,
not the SD card. Formatting the SD card
will not delete the screen saver images.
Privacy
Q: Is the signal secure?
A: Yes. The Digital Wireless signal transmission type used by the receiver
is also known as
FHSS- Frequency Hopping Spread Spectrum. This type of signal is highly resistant to
deliberate jamming as it generates a channel hopping sequence using a sophisticated
algorithm generated by the receiver system.
Q: What memory cards is the LCD receiver compatible with?
The system is compatible with SD (Secure Digi
tal) and SDHC (SD High Capacity) memory
cards, minimum Class 2.
Q: What is the maximum capacity SD memory card supported?
A: The system supports a maximum of 16 gigabtyes.
Recording
Q: Can I view remotely and record at the same time?
A: No. You can only view during remote
viewing. Local recording is disabled.
Q: Can I record multiple cameras at the same time?
A: The LCD receiver can only record one channel at a time.
TIP: Set
Trigger Record in the Record menu to 5 seconds (the lowest possible value), and
enable Quad Mode. This allows the system to: a) record a channel for 5 seconds when
motion is detected b) Records the next channel that detects motion for another 5 seconds.
To Next Page
Loading...
Need help?
General
