58
Frequently Asked Questions
Frequently Asked Questions
General Questions
Q: Why can't I open the main menu, change viewing mode, access recordings, or access
any other options while in recording mode?
A: In order to perform any changes on the system while in recording mode, you will need
to
stop recording. Recording overrides other actions on the receiver.
Q: How do I turn off the Alarm ('be
eping') sound?
A:
1 Pr
ess the Menu button on the remote.
2 N
avigate to Setting>Alarm Volume
3 Pr
ess the back (number 4) button repeatedly on the remote to turn the volume all the way
down. Note: One volume bar means the alarm sound is muted.
4 Pr
ess Enter on the remote.
Q: Can I extend the wireless
range of the receiver?
A: Yes. There are optional antennas available at lorextechnology.com that
help boost
wireless signals.
Q: While in Quad Viewing mode, how can I quickly go to a specific channel?
A: Press the direction button on the remote that refers to the channel
number you want to
view.
To now view another channel, repeatedly press the M channel
button on the remote until
you have reached your desired channel.
Q: What happens to the system during a power failure
while in recording mode?
A: A power failure may interrupt recording modes
on the system. After power is restored,
the following occurs:
• The system will restart in Auto Sequence Mode + Motion Recording. This ensures that some
f
orm of recording will be immediately active on the system.
• A flashing Power Failure icon will appear on-screen. The Power Failure icon indicates that a
power failure occurred while the system was actively recording.
NOTE: If y
ou had a different display view or recording mode set when the power failure
occurred, you will need to re-apply the previous dis
play view and recording mode.
To Next Page
Loading...
Need help?
General
