Using the On-Screen Display (OSD) Menu
1
To configure the camera’s exposure mode:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select EXPOSURE SETTING and click Enter.
3. Under AE MODE, click the left / right arrow keys to select one of the following exposure
modes:
• AUTO: The settings for gain, iris, and shutter are determined automatically by the
software.
• IRIS PRIORITY: Configure iris settings only. Gain and shutter settings are deter-
mined automatically by the software.
• SHUTTER PRIORITY: Configure shutter settings only. Gain and iris settings are de-
termined automatically by the software.
• MANUAL: Advanced users only — this mode requires you to configure the settings
for gain, iris, and shutter to achieve proper exposure.
4. Under GAIN SETTING, click the left / right arrow keys to set the gain value (1–16). Set-
ting the gain manually allows you to artificially create a brighter (high gain) or darker
(low gain) image. The AE MODE must be set to MANUAL to configure the gain value.
5. Under SHUTTER, click the left / right arrow keys to set the shutter speed (1/4 – 1/
30,000). Setting the shutter speed manually determines how long the camera shutter
remains open when capturing an image. It is recommended to keep shutter speed set
to 1/60 to ensure smooth video. The AE MODE must be set to MANUAL or SHUTTER
PRIO to configure the shutter speed.
6. Under IRIS, click the left / right arrow keys to adjust the iris (1–18). Setting the iris man-
ually determines how much light comes through the lens. The AE MODE must be set
to MANUAL or IRIS PRIO to configure the iris setting.
1.3.3 Exposure Compensation
Use exposure compensation to fine-tune the camera’s exposure. You can use exposure
compensation with automatic exposure to brighten or darken an image to your preference.
#LX400027; r. 1.0/16996/16996; en-US
8
To Next Page
Loading...
Need help?
General
