Lorex LZV1722 - High Light Reduction (HLR)

Using the On-Screen Display (OSD) Menu
1
4. Under NR, click the left / right arrow keys to set the 2D noise reduction level (1–16). It
is recommended to keep the 2D noise reduction at the default level of 8 unless the
camera image is noisey in low-light conditions.
5. Under CAMERA 3D NR, click the left / right arrow keys to set the 3D noise reduction
level (1–16). It is recommended to keep the 3D noise reduction at the default level of 8
unless the camera image is noisey in low-light conditions.
1.3.8 High Light Reduction (HLR)
Turn High Light Reduction (HLR) on or off. Turning HLR on darkens extremely bright cam-
era images to ensure a clear camera image.
To enable HLR:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select EXPOSURE SETTING and click Enter.
3. Select NEXT PAGE and click Enter.
#LX400027; r. 1.0/16996/16996; en-US
12