Using the On-Screen Display (OSD) Menu
1
To initialize the lens:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select NEXT PAGE and click Enter.
3. Select LENS INIT and click Enter. The camera image disappears momentarily while
the lens initializes.
1.3.19 Picture Mode
Choose the resolution and frame rate of the camera’s live view.
To set picture mode:
1. Use the on-screen arrow keys to navigate to CAMERA SETTING and click Enter.
2. Select NEXT PAGE and click Enter.
3. Under PICTURE MODE, click the left / right arrow keys to select the resolution and
frame rate for the live video stream. North American users should select one of the pic-
ture modes listed under NTSC, while European users should use one of the PAL pic-
ture modes.
NTSC:
• 720P / 30: 720p resolution @ 30 frames per second (recommended).
• 720P / 60: 720p resolution @ 60 frames per second.
PAL:
• 720P / 25: 720p resolution @ 25 frames per second.
• 720P / 50: 720p resolution @ 50 frames per second.
#LX400027; r. 1.0/16996/16996; en-US
19
To Next Page
Loading...
Need help?
General
