STORAGE
1. Before storing the mower, certain precautions
should be taken to protect it from
deterioration. Let engine cool before storing
and do not store near flame.
2. Shut off fuel while storing or transporting. Do
not store fuel near flames or drain indoors
3. Clean the mower thoroughly.
4. Make all the necessary repairs.
5. Replace all Safety Signs that are damaged,
lost, or otherwise become illegible. If a part to
be replaced has a sign on it, obtain a new
safety sign from your dealer and install it in
the same place as on the removed part.
6. Repaint all parts from which paint has worn or
peeled.
7. Lubricate the mower as instructed under
"Lubrication" section.
8. When the mower is dry, oil all moving parts.
Apply oil liberally to all surfaces to protect
against rust.
9. Attach driveline shield safety chain around
driveline by passing it over the upper hitch
10.Store in a dry place.
STAY CLEAR OF ROTATING
DRIVELINES
- Entanglement in rotating driveline can cause
serious injury or death.
- Wear close fitting clothing. Stop the engine
and be sure that PTO driveline is stopped
before making adjustments, connections, or
cleaning out PTO driven equipment.
TRANSPORT
1. If the tractor/mower is to be driven on public
roads, it must be equipped with an SMV
(Slow Moving Vehicle) sign. Check local
traffic codes that may apply to unit usage on
public roads and highways in your area.
2. Be alert for all other traffic when driving the
tractor/mower on public roads or highways.
To Next Page
Loading...
Need help?
General