INTRODUCTION
All parts are illustrated in "exploded views" which show the individual parts in their normal relationship
to each other. Reference numbers are used in the illustrations. These numbers correspond to those in
the "Reference Number" (REF) column, and are followed by the description and quantity required.
"Right Hand" and "Left Hand" sides of the machine are determined by those seen by the conductor
looking at the machine operating.
Orders must give the complete description, correct part number, the total amount required, the serial
number, the method of shipment and the shipping address.
The manufacturer reserves the rights to change, modify, or eliminate from time to time, for technical or
other reasons, certain or all data, specifications, or the product or products themselves, without any
liability or obligation.
The parts listed here are available through your local dealer.
To Next Page
Loading...
Need help?
General