LS tractor LM3560A User Manual

MAINTENANCE
OM 0442MW-A 29
PROBLEM
CAUSE
CORRECTIVE MEASURE
4. Blades tear
the grass
• Cutting height too low
• Swing speed too fast
• Bumps in field
• Hilly ground or irregular
• Anti-scalp rollers not adjusted
• Twisted blades
• Raise the cutting height
• Reduce the swing speed
• Change mowing layout
• Adjust the anti-scalp rollers
• Adjust the anti-scalp rolls
• Replace blade
5. Belt slipping
• Obstructed mower frame
• Debris in the pulleys
• Worn out belt
• Unblock and clean up the mower
frame
• Clean up pulleys
• Replace belt
6. Excessive
vibration
• Debris over the mower frame or in the
pulleys
• Damaged belt
• Damaged pulleys
• Pulleys not aligned
• Unbalanced blades
• Clean up the mower frame and the
pulleys
• Replace belt
• Replace pulleys
• See your dealer
• Balance the blades
7. Mower loads
the machine
too much
• Engine speed too low
• Moving speed too fast
• Debris wrapped around the mower
spindles
• Mow at full speed, check and adjust
the engine speed
• Slow down
• Clean up the mower

LS tractor LM3560A Specifications

General

Brand	LS tractor
Model	LM3560A
Category	Lawn Mower
Language	English