LSIS XGL-EFMT - Page 155

Chapter 8 Dedicated Protocol Communication
8-15
(5) Description of flags
1) _CPU_TYPE
15Bit : XGK(1)/XGI(0), 15-Bit : Single, Redundancy master(0)/ Redundancy slave(1)
Single : h8000~hffff
hA001 : XGK-CPUH
hA002 : XGK-CPUS
2) _VER_NUM
hXXYY : xx.yy
3) _SYS_STATE
It displays operation mode and operation status information of the system (DWORD, F00~F01)
Variable
Type
Device
Function
Description
_RUN Bit F00000 RUN CPU module’s operation status in RUN.
_STOP Bit F00001 STOP CPU module’s operation status in STOP.
_ERROR Bit F00002 ERROR CPU module’s operation status in ERROR.
_DEBUG
Bit
F00003
DEBUG
CPU module’s operation status in DEBUG.
_LOCAL_CON Bit F00004 Local control Operation mode changeable only by mode key
_MODBUS_CON Bit F00005 Modbus mode On During Modbus slave service.
_REMOTE_CON Bit F00006 Remote mode On During Run in remote mode.
- Bit F00007 - -
_RUN_EDIT_ST Bit F00008
Modification in progress
during Run (program
being downloaded)
Modified program standing by while modified
during Run.
_RUN_EDIT_CHK Bit F00009
Modification in
progress during Run
(internally processed)
Modification during Run being processed
Internally.
_RUN_EDIT_DONE
Bit F0000A
Modification complete
during run
Modification normally complete during run.
_RUN_EDIT_END Bit F0000B
Internal flag known
when modification
complete during run
Modification normally complete during run.
_CMOD_KEY Bit F0000C
Operation mode change
cause
Operation mode changed by key.
_CMOD_LPADT Bit F0000D
Operation mode change
cause
Operation mode changed by local PADT.
_CMOD_RPADT Bit F0000E
Operation mode change
cause
Operation mode changed by remote PADT.
_CMOD_RLINK Bit F0000F
Operation mode
change cause
Operation mode changed by remote
communication module.
_FORCE_IN Bit F00010 Compulsory input
Compulsory On/Off being executed for input
contact.
_FORCE_OUT Bit F00011 Compulsory output
Compulsory On/Off being executed for output
contact.