Chapter 8 Dedicated Communication
8-16
_SKIP_ON Bit F00012
I/O skip being
Specified I/O module existent to stop error
_EMASK_ON Bit F00013
Error mask being
Specified I/O module existent to speedily carry
out the operation even if a defect occurred.
_MON_ON Bit F00014 Being monitored
External monitor in progress for programs and
Variables.
_USTOP_ON Bit F00015
Stop by stop
Stopped by stop function after scan closed
during RUN mode operation.
_ESTOP_ON Bit F00016
Stop by ESTOP
function
Immediately stopped by ESTOP function during
RUN mode operation.
_CONPILE_MOD
Bit F00017
Compiling Compile being performed.
Initializing Initialization task being performed.
No.1 program code being executed.
No.2 program code being executed.
No.1 compile code being executed.
No.2 compile code being executed.
4) _CNF_ER
It displays the error flags related with the operation stop errors.
_CPU_ER Bit F00020
CPU configuration
Normal operation unavailable due to CPU
module’ error found by self-diagnosis.
_IO_TYER Bit F00021
Module type
discordant Error
Different configuration between each slot’s I/O
configuration parameters and actually installed
_IO_DEER Bit F00022
Module installation
If each slot’s module configuration changes
during Run, it will be detected and displayed.
_FUSE_ER Bit F00023 Fuse blown error
If fuse is blown on the module among each
slot’s modules, it will be detected and displayed.
_IO_RWER Bit F00024
I/O module Read/
Displayed if normal Read/write of I/O module
among each slot’s modules is not available.
_IP_IFER Bit F00025
Special/communicat
ion module
Displayed if normal interface is unavailable due
to abnormal special or communication module
among each slot’s modules.
_ANNUM_ER Bit F00026
Serious error
detected in external
Displayed if serious error detected in external
device by user program and recorded on
To Next Page
Loading...
