p/n 18603-001, Rev. C LTV
®
1200/1150 Ventilator Service Manual Page 8-77
Internal Battery Pack
Parts required for replacement: Tools required:
• LTV
®
1200/1150 Internal Replacement
Battery
P/N 18608-001.
• Torque driver (120 in-oz/0.84 Nm)
• 3/32” Hex bit
CAUTION
Internal Battery Use - The internal battery is intended for use in LTV
®
ventilators during
short periods while switching between external power supply connections, emergency
situations or short duration transports. The length of time the ventilator will operate on
battery power is a function of many factors such as settings, charge level and condition or
age of the battery; therefore, the use of the internal battery as a standard operating practice
is not recommended.
To remove and replace the battery pack:
1) Position the LTV
®
1200/1150 ventilator as shown (front side down) on a clean, dry
work surface and use a 3/32” hex bit to remove both button socket head cap screws
(2, p/n 18296-001) from the Battery Cover.
2) Open the cover and take note of how the battery connector wires are positioned
between the side of the case and the battery.
To Next Page
Loading...
