PARTNER MAIL Administration
4.
Choose:
—
To delete the fax extension, press [
0
] followed by [
#
].
The system confirms that there is no fax extension.
—
To add or modify the fax extension, enter the new EXTENSION
followed by [
#
].
The new extension number plays, along with the message:
The Touch-Tone Gate is on
followed by the System Parameters Menu.
5.
Press [
✱
] [
#
] to return to the Administration Main Menu.
Changing the System Operator’s
Extension
Use Form 2: System Parameters to determine the System Operator’s extension. The
factory setting for the System Operator's extension is 10.
1.
2.
3.
4.
5.
Access the Administration Main Menu as described in an earlier section.
The system plays the system programming options.
Press [
1
] for System Parameters.
The System Parameters Menu plays.
Press [
5
] to change the System Operator's extension.
The current System Operator's extension plays and prompts for a new
extension.
Enter the System Operator's new EXTENSION followed by [ #
].
The new extension number plays, followed by the System Parameters Menu.
Press [
✱
] [
#
] to return to the Administration Main Menu.
6-8 Changing System Parameters
To Next Page
Loading...
Need help?
General