Luminex GigaCore Series - Profile Manager

33
Prole Manager
The prole manager allows the user to easily save / recall / export / import a conguration.
A prole will contain the following parameters :
■ Device settings
■ Port settings
■ RLinkX settings
■ Groups settings
■ PoE settings.
In this way, user can create a comprehensive conguration of a switch, save it as a prole, and recall it later when needed.
A maximum of ten proles can be saved on a GigaCore switch.
The switch also oers to export / import a prole through a computer, providing user an easy way to exchange prole
between switches.
From one switch, user will select a prole to export in a computer. Then, from the same computer, user will be able to
load this prole into the empty slot of a secondary switch.
Exchanging proles between switches can be a time saving process; User may start with one base conguration, and
export it to the other switches for minor changes. These newly created proles will then be saved locally.
■ Save a prole
If you wish to save the actual conguration of your switch, rst select an empty slot amongst the 10 available slots.
Press the Save button. A small window will pop-up, to enter the name of the prole.