GB
24
3. Operation
+ Following described key sequences must be pressed step by step.
3.1 Manual mode
In manual mode, the filling process is carried out using a manually operated nozzle. The part volume meter is
reset to zero and the required volume is metered.
3.1.1 Resetting the part volume meter
Operation Display
+ Only possible in manual mode
3.1.2 Displaying totalizer
The totalizer adds all individual metering processes carried out in the manual or automatic mode.
Operation Display
+ The total volume appears as long as the key is depressed.
3.1.3 Displaying flow rate
Operation Display
+ The total flow rate appears as long as the key SPEED is depressed.
The flow rate is displayed in the selected volume unit per minute.
C. Operating unit
To Next Page
Loading...
Need help?
General