169
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
The following entries are displayed on this screen:
Create Holiday
Start Date:
Specify the Start Date of the Holiday.
End Date:
Specify the End Date of the Holiday.
Holiday Name:
Enter the Name of the Holiday.
Holiday Table
Select:
Select the desired entry to Delete the corresponding Holiday.
Index:
Displays the Index of the Holiday.
Holiday Name:
Displays the Name of the Holiday.
Start Date:
Displays the Start Date of the Holiday.
End Date:
Displays the End Date of the Holiday.
CAUTION: ACL Holiday Config settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config
from the main menu and saved your running configuration to
non-volatile memory.
11.2 ACL Config
An ACL may contain a number of Rules, and each Rule specifies a different packet
range. Packets are Matched in order. Once a Rule is Matched, the Switch Processes
the Matched packets taking the operation specified in the Rule without Processing
the other Rules. ACL Rules are used to increase the performance of the Switch and to
maintain a secure local Network.
Packets are classified based on Matching Rules in order of the Rules in the ACL
Rule Table.
The ACL Config can be implemented on ACL Summar, ACL, MAC ACL Rule Standard-
IP ACL Rule and Extended-IP ACL Rule pages.
11.2.1 ACL Rule Table
On this page, you can view the current ACLs configured in the Switch.
To Next Page
Loading...
Need help?
General
