24
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
NOTE: The System IP settings will be restored to defaults if the Switch
is restarted and you have not selected Save Confi g from the
main menu and saved your running confi guration to
non-volatile memory.
NOTE: Changing the IP Address to a different IP subnet (i.e. from
192.168.0.XXX to 192.168.1.XXX) will interrupt Network communication.
Please keep the new IP Address in the same IP subnet as the rest of
the local Network.
NOTE: The Switch only requires one IP Address. Any new IP Address
confi gured will replace the original default IP Address.
NOTE: If the Switch gets an IP Address from the DHCP Server, you can fi nd
the IP confi guration information of the Switch in the DHCP Server
connected clients list. If DHCP option is selected but no DHCP Server
exists, the Switch will keep trying to obtain the IP Address from DHCP
Server until successful.
4.2 User Management
User Management allows you to confi gure the User Name and Password for log in to
the Web Management page with the desired access level to protect the settings of the
Switch from being changed by unauthorized users.
The User Management function can is implemented in the User Table and
User Confi g pages.
4.2.1 User Table
On this page you can view the information about the current confi gured users
of the Switch.
Choose the menu System>>User Management>>User Table to load the following page.
Figure 4-8 User Table
To Next Page
Loading...
Need help?
General
