82
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Configuration Procedure
Configure Switch A
Step Operation Description
1
Configure the Link Type of
the Ports
On VLAN>>802.1Q VLAN>>Port Config page configure
the link type of Port 2 as ACCESS, Port 3 as TRUNK and
Port 4 as ACCESS
2
Create VLAN10 On VLAN>>802.1Q VLAN>>VLAN Config page create a
VLAN with a VLANID of 10 with members being Port 2
and Port 3
3
Create VLAN20 On VLAN>>802.1Q VLAN>>VLAN Config page create a
VLAN with a VLANID of 20 with members being Port 3
and Port 4.
Configure Switch B
Step
Operation Description
1
Configure the Link Type of
the Ports
On VLAN>>802.1Q VLAN>>Port Config page configure
the link type of Port 7 as ACCESS, Port 6 as TRUNK and
Port 8 as ACCESS
2
Create VLAN10 On VLAN>>802.1Q VLAN>>VLAN Config page create a
VLAN with a VLANID of 10 with members being Port 6
and Port 8
3
Create VLAN20 On VLAN>>802.1Q VLAN>>VLAN Config page create a
VLAN with a VLANID of 20 with members being Port 6
and Port 7.
6.5 Application Example for MAC VLAN
Network Requirements
Switch A and Switch B are connected to meeting room A and meeting room B respec-
tively, and the two rooms used by all departments;
Notebook A and Notebook B, are from two different departments;
The two departments use VLAN10 and VLAN20 respectively. The two notebooks can
only access the Server of their own departments;
The MAC address of Notebook A is 00-19-56-8A-4C-71, Notebook B’s MAC address is
00-19-56-82-3B-70.
To Next Page
