84
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Configure Switch B
Step
Operation Description
1
Configure the Link Type of
the Ports
On VLAN>>802.1Q VLAN>>Port Config page configure
the link type of Port 11 as GENERAL and Port 12 as TRUNK.
2
Create VLAN10 On VLAN>>802.1Q VLAN>>VLAN Config page create a
VLAN with a VLANID of 10 with members being Port 11
and Port 12 and configure the Egress Rule of Port 11 as
Untag and Port 12 as Tag.
3
Create VLAN20 On VLAN>>802.1Q VLAN>>VLAN Config page create a
VLAN with a VLANID of 20 with members being Port 11
and Port 12, and configure the Egress Rule of Port 11 as
Untag and Port 12 as Tag.
4
Configure MAC VLAN 10 On VLAN>>MAC VLAN page create MAC VLAN10 with a
MAC Address of 00-19-56-8A-4C-71.
5
Configure MAC VLAN 20 On VLAN>>MAC VLAN page create MAC VLAN20 with a
MAC Address of 00-19-56-82-3B-70.
Configure Switch C
Step Operation Description
1
Configure the Link Type
of the Ports
On VLAN>>802.1Q VLAN>>Port Config page configure the
link type of Port 2 as GENERAL, Port 3 as GENERAL, Port 4
as ACCESS and Port 5 as ACCESS.
2
Create VLAN10 On VLAN>>802.1Q VLAN>>VLAN Config page create a
VLAN with a VLANID of 10 with members being Port 2,
Port 3 and Port 5.
3
Create VLAN20 On VLAN>>802.1Q VLAN>>VLAN Config page create a
VLAN with a VLANID of 20 with members being Port 2,
Port 3 and Port 4.
6.6 Application Example for Protocol VLAN
Network Requirements
Department A is connected to the company LAN via Port12 of Switch A;
Department A has IP host and AppleTalk host;
IP host, in VLAN10, is served by IP Server while AppleTalk host is served by
AppleTalk Server;
Switch B is connected to IP Server and AppleTalk Server.
To Next Page
