LX 10k
Release notes
Document name: LX 10KUM
Document revision: R1
Release notes
10.1 1.6.151/6508 (2020-07-14)
• Displaying ”Select from the list” instead of empty field for Select TP/APT/AS item in Trans-
fer menu
10.2 1.6.142/6504 (2020-07-06)
• Added Watchdog reset to waypoint sort loop on NRST page (possible fix for NRST page
crashes)
• Delete task on 2nd seat if deleted on 1st and vice versa if Sync on change is enabled.
• Change for changing MC, bal, bugs on 2nd seat not being sent to user port via LXDT.
• Change for not sending MC, bal, bugs during editing.
• Change for APT freq. voice not being played if new APT received from 2nd seat (sync)....
• Total and remaining distance show ”—” instead of 0.0 (when route not selected)
10.3 1.6.136/6495 (2020-07-02)
• Fix for voice output stuttering if initial page finished before ”Set QNH” audio has been
played to the end
• Fix for BT and WiFi status icons not being shown correctly on secondary units (including
digital vario indicator)
• Circling radius Nav box title renamed from ”RAD” to ”CIRC RAD”
• Odin version in device info production page
• Additional RAM space optimizations
• Cirus renamed to Cirrus in glider list
• Added Flarm ID to Flarm info in Setup -¿ Service menu
• Showing ”—” instead of false values for distance, FG, bearing and req. eff. in navboxes
when no TP/APT/TSK/NRST is selected.
• Change for Brightness setting. Before it was being syncronized between 1st and 2nd seat
device. Now each has individual setting.
• Fix for changing the MC values by the user port via $LXDT,SET,MC BAL which changed
MC for the primary device only. Now it is sent to 2nd seat also.
10.4 1.6.119/6478 (2020-06-15)
• Optimizing Setup menu for saving RAM space
• AHRS page renamed from PFD back to AHRS in Pages setup
• Added language Italian
Device manual Public 101
To Next Page
