LX 10k
Basic operation
Document name: LX 10KUM
Document revision: R1
3.4 Performing an update
In order to be on track with the latest software releases, be sure to regularly follow our
Database webpage. Once you find an update, contact LX navigation support via the following
email: info@lxnavigation.com with your contact details, device type, the software version you
would like to update to and the serial number of your device. The support staff will provide you
with an update code.
Once you have received the update code, follow these steps:
1. Copy the desired software update file to the root of the microSD card. The update file
should have the word 10k within its name and an extension of .lxu. Be sure to use the
supplied SanDisk Ultra microSD card.
2. Insert the microSD card and turn the device on
3. Go to Setup > Service > Software update
4. Select the desired update file
5. When prompted, type in the update code supplied by LX support
6. The device will copy the file to the internal memory and perform the update. It may restart
a couple of times.
7. Once the update has finished, verify that the update has been successful by going to Setup
> Service > Device info and checking that the SW version has changed to the desired one
NOTE
The LX 10k will shut down during the update procedure and will require the right
push-rotary knob to be pressed in order to turn it on after the file has been copied,
in order for the update process to proceed.
WARNING
Once the LX 10k has been updated, it will update the indicator and all other
CAN-compatible devices (LX Joy, second seat device, etc). For this reason, the
LX 10k should be left ON for at least five minutes after the main unit has been
successfully updated. If the update of CAN units is ongoing, an infobox will
appear, notifying the pilot. While this infobox is active, the unit should not be
used.
WARNING
Great care should be taken not to turn the device off while the updating process
is running. Data corruption may occur. If something similar happens, contact LX
support immediately, in order to recover your unit.
Device manual Public 16
To Next Page
Loading...
