LX Navigation LX10K - Automated Builds (from - 6- to - - 6)

LX 10k
Release notes
Document name: LX 10KUM
Document revision: R1
10.13 1.4.29/6345 (2020-04-28)
• Long update file names enabled.
• AHRS page stripe widgets color fixed on white theme.
• Added ”This list is empty” text to Airspace and Logbook page if list is empty.
• Added Flight Manager class for detection of flight phases and landings + corresponding
NavBoxes.
10.14 Automated builds (from 2019-06-17 to 2020-04-06)
• Added cage AHRS in Setup -> Service menu
• Warnings -> Altitude renamed to Max. Altitude
• Sending shutdown command (MCS) on main unit shutdown
• Implemented flap position settings
• Improved Timezone select menu
• Added DST
• Low battery warning added
• ICAO code shown on APT/TP details page
• Added navboxes thermal avg, max in gain
• Added popup message when SSID name is changed that WiFI should be restarted for
change to take effect
• Fixed map background color according to selected theme
• Default map colors set to more visible on both white and black theme
• Added remove pilot feature
• Black border added to arrows on Flarm page.
• Added option to turn off altitude warning.
• AIR Avionics ACD support.
• Added filter for most important values when saving to model.
• Added polar Technoflug Piccolo.
• Added notifications for red cross on AHRS, Flarm and navigational pages.
• Added setting for sending frequency on APT select.
• TRIG radio support.
• Multiple TP AS file selection supported.
• Selected TP/APT/AS/FlarmNET files setting moved from User to System.
• SC Switch setting moved from Vario/SC to Glider menu.
• Glider Reg Nr, Comp Id, Class settings moved from User to System.
• Improved and simplified Network setup.
• Pilot Copilot synchronization between 1st and 2nd seat (fixes problems with wrong Total
mass, STF etc.)
• Task finish altitude implemented.
• New polar added Diamant 16.5
• WiFi symbol in status header coloured green if connected to WiFi.
• Added some additional characters to WiFi password keyboard.
• Ignoring AS warnings for 5 min after take-off.
• AS warning close button is settable in Setup > Warnings -> AS close button.
• Logger start speed is settable in Setup > Logger -> Start speed.
Device manual Public 103