LX 10k
Connectivity
Document name: LX 10KUM
Document revision: R1
You will now see the icon symbolizing the connecting attempt - and a the shift of the WiFi
network name to the ’Connected’ list, if the connection attempt is successful.
6.1.1.3 Sending the flight
To send a flight, go to the Logbook page, and select the flight you wish to send. Once the
’Flight info’ sub-page has popped up, scroll down and choose the Send to email option.
The LX 10k will prepare the flight for sending, a ’Preparing data’ infobox will appear, and a
second infobox, showing an hourglass. Once the flight has been sent, an infobox notifying you
of the successful upload will appear.
Now, check your email.
6.2 Bluetooth connectivity
Bluetooth connectivity is used mainly for the transfer of data. Data in the sense of NMEA
sentences.
Practically, this means supplying data like wind information, IAS, vertical speed, altitude, etc.
This data is then used by the 3rd party device for more exact calculations.
Also, a Bluetooth connection allows a third party device to send a declaration to the LX 10k, as
well as changing different settings, like MC, ballast and bugs.
We will look over two cases, an Android phone (XC Soar) and an Oudie, as these represent
Android applications and different PDA/PNA devices, respectively.
6.2.1 Connecting an Android device (XC soar)
In order to connect an Android phone, the following steps are required:
1. Establishing a Bluetooth connection
2. Setting up the LX 10k
3. Setting up XC Soar
6.2.1.1 Establishing a Bluetooth connection
To set up a Bluetooth connection, go to Setup > Network > Wireless mode and choose
Bluetooth server.
Exit the Wireless mode setup by going back and open the Wireless setup menu. You will find
your device’s Bluetooth name and password, needed fro establishing a Bluetooth connection.
Now take your Android phone, turn the Bluetooth on and check the ’Available devices’ list. You
should see your LX 10k. Select the LX 10k and the connection will be established.
Device manual Public 78
To Next Page
Loading...
