MacDon A30-D - Header Drive: A30-S

PRE-DELIVERY CHECKS
169001 Revision E
36
A. HEADER DRIVE: A30-S
AUGER SHAFT BEARING (1 PLC)
AUGER DRIVE BEARING (1 PLC)
REEL SHAFT BEARING (1 PLC)
SICKLE HEAD BEARING (1 PLC)
NOTE
To prevent binding and/or excessive wear
caused by sickle pressing on guards, do not
over grease. If more than 6 to 8 pumps of
the grease gun are required to fill the cavity,
replace the seal in the sickle head.
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base.
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base.
AUGER DRIVE CHAIN (1 PLC)
SAE 30