MacDon A30-D - Header Drive: A30-D

PRE-DELIVERY CHECKS
169001 Revision E
38
C. HEADER DRIVE: A30-D
AUGER DRIVE CHAIN (1 PLC)
SAE 30
SICKLE HEAD BEARING (1 PLC)
NOTE
To prevent binding and/or excessive wear
caused by sickle pressing on guards, do not
over grease. If more than 6 to 8 pumps of the
grease gun are required to fill the cavity,
replace the seal in the sickle head.
CROSS SHAFT BEARING (1 PLC)
AUGER SHAFT BEARING (1 PLC)
REEL SHAFT BEARING (1 PLC)
OIL KNIFE DAILY
EXCEPT IN SANDY SOIL
SAE 30
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base.
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base.