MacDon A30-D - Header Drive: A30-D

PRE-DELIVERY CHECKS
169001 Revision E
39
D. HEADER DRIVE: A30-D
REEL SHAFT BEARING (1 PLC)
SICKLE HEAD BEARING (1 PLC)
NOTE
To prevent binding and/or excessive wear
caused by sickle pressing on guards, do not
over grease. If more than 6 to 8 pumps of the
grease gun are required to fill the cavity,
re
p
lace the seal in the sickle head.
GAUGE ROLLER BEARINGS (2 PLCS) -
BOTH SIDES
AUGER SHAFT BEARING (1 PLC)
SICKLE DRIVE BEARING (1 PLC)
REEL DRIVE CHAIN (1 PLC)
SAE 30
High Temperature
Extreme Pressure (EP2)
Performance With 1%
Max Molybdenum
Disulphide (NLGI Grade 2)
Lithium Base.