MacDon A30-D - Hay Conditioner: A30-D

PRE-DELIVERY CHECKS
169001 Revision E
41
F. HAY CONDITIONER: A30-D
ROLL PIVOT (1 PLC BOTH SIDES)
ROLL SHAFT BEARINGS (2 PLCS)
CROSS SHAFT (1 PLC)
CROSS SHAFT (1 PLC)
GEARBOX OIL LEVEL WITH HEADER IN
WORKING POSITION -
OIL RUNS OUT OF CHECK PLUG
DRIVELINE UNIVERSALS (2 PLCS)
ROLL SHAFT BEARINGS (2 PLCS)
SAE 85-140
DRIVELINE UNIVERSALS (2 PLCS)
DRIVELINE SHAFTS (2 PLCS)
NOTE
10% MOLY GREASE IS
RECOMMENDED FOR DRIVELINE
SHAFT SLIP JOINTS ONLY.
SEE NOTE
High Temperature Extreme
Pressure (EP2) Performance
With 1% Max Molybdenum
Disulphide (NLGI Grade 2)
Lithium Base.
High Temperature
Extreme Pressure (EP2)
Performance With 1% Max
Molybdenum Disulphide
(NLGI Grade 2)
Lithium Base.