SAFETY
169001 Revision E
4
Stop engine, and remove key from ignition
before leaving Operator’s seat for any
reason. A child or even a pet could engage
an idling machine.
Keep the area used for
servicing machinery clean
and dry. Wet or oily floors
are slippery. Wet spots
can be dangerous when
working with electrical
equipment. Be sure all
electrical outlets and tools
are properly grounded.
Use adequate light for the
job at hand.
Keep machinery clean. Do not
allow oil or
grease to accumulate on service platforms,
ladders or controls. Clean machines before
storage.
Never use gasoline, naphtha or any volatile
material for cleaning purposes. These
materials may be toxic and/or flammable.
When storing machinery, cover sharp or
extending components to prevent injury from
accidental contact.
To Next Page
Loading...
