Need help?Do you have a question about the Maestro M111 and is the answer not in the manual?
Safety issues related to RF interference and regulations.
Guidelines for error-free usage and protecting the modem.
Explains the different operating modes of the M110 modem with mPack.
Initial steps and configuration for putting the M110 modem into operation.
Explains the syntax for AT commands, including u-blox and mPack commands.
Resets the device configuration to factory defaults.
Performs a software reset on the M11X device.
Controls modem reset based on network failure conditions.
Configures UART baudrate, character-framing, and flow control.
Configures versatile Input/Output (I/O) channels.
Controls versatile I/O in output mode.
Configures cellular network parameters like APN, username, and password.
Troubleshooting steps for when the modem's LED is off.
Troubleshooting for unstable GREEN LED after power up.
Troubleshooting steps when the modem doesn't respond to terminal program.
General| Model | Maestro M111 |
|---|---|
| Category | Modem |
| Temperature Range | -20°C to +55°C |
| GSM bands | 850/900/1800/1900 MHz |
| GPRS | Class 10 |
| Supply voltage | 5-32V DC |
| Supported Networks | GSM/GPRS |
| Frequency Bands | 850/900/1800/1900 MHz |
| Data Transfer Rate | Up to 85.6 kbps |
| Cellular Line | GSM / GPRS |
| Output power | 2W @ 850/900 MHz, 1W @ 1800/1900 MHz |
| Interfaces | RS232, USB |
| Interface | RS232, USB |
| Operating System Compatibility | Windows, Linux |
To Next Page
