AT#IPCONNECT=(1),(mode)
– mode:
• 0: disconnect cellular data
• 1: connect cellular data
exec :
AT#IPCONNECT=1,1
OK
state :
AT#IPCONNECT?
#IPCONNECT: 1,1
OK
info :
AT#IPCONNECT=?
#IPCONNECT: (1),(0-1)
OK
5.3 AT#IPPING
IP PING configuration and action
ALLOWED: exec-state-info
AT#IPPING=(option),(address),(num),(interval),(timeout)
– option
• 0, 1: reserved
• 2: configure ping address and parameters
– address: IP address of the target to be pinged
– interval: time in second between each ping trial. Default value is 3. Valid range is 1 to 10.
– timeout: time in ms before ping is timed out. Default value is 10. Valid range is 5000 to 60000.
exec :
// destination can be reached
AT#IPPING=2,"8.8.8.8",4,10,5000
OK
AT#IPPING
(to be specified)
// destination cannot be reached
AT#IPPING=2,"non-existing-ip",4,10,5000
OK
AT#IPPING
(to be specified)
24 Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd.
Please contact us on support.maestro-wireless.com
To Next Page
Loading...
