Maestro M111 - 10 Trigger Commands; At#Ditrig; At#Ditrigenb

Chapter 10
TRIGGER COMMANDS
10.1 AT#DITRIG
Configure DI high low threshold parameter
ALLOWED: exec-state-info
AT#DITRIG=(pin_number),(min_val),(max_val),(debounce)
– pin_number: 1-2
– min_val: 0-32000, in mV
– max_val: 0-32000, in mV (must be >= min_val)
– debounce: 0-10 (in seconds)
exec :
AT#DITRIG=1,3000,11250,10
OK
state :
AT#DITRIG?
#DITRIG: 1,3000,11250,10
#DITRIG: 2,0,3200,0
OK
info :
AT#DITRIG=?
#DITRIG: (1,2)(0-32000),(0-32000),(0-10)
OK
10.2 AT#DITRIGENB
Enable DI trigger parameters
ALLOWED: exec-state-info
AT#DITRIGENB=(pin_number),(enb),(trigger_type)
– pin_number: 1-2
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd.
Please contact us on support.maestro-wireless.com
43