AT#MRST?
#MRST: 1,"100:00","099:59”
OK
info :
AT#MRST=?
OK
3.5 AT#NWRST
Controls reset of the modem in case of network failure conditions
ALLOWED: exec-state-info
Note:
– Network failure conditions are defined to be cases where registration to cellular/data network fails, or bad
signal quality. Each time only one of the above network conditions are checked
AT#NWRST=(option),(timer),(counter)
– option: 0 to disable, 1 to enable, 2 to configure. Default disabled
– timer : 5-120 second interval at which network conditions are checked (different network conditions are checked
each time). Default 5
– counter: 10-1000; count of consecutive network failures, after which the device will reset if option = 1. Default
10
exec :
AT#NWRST=1,10,18
OK
state :
AT#NWRST?
#NWRST: 1,10,18
OK
info :
AT#NWRST=?
#NWRST: (0-2),(5-120),(10-1000)
OK
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd.
Please contact us on support.maestro-wireless.com
15
To Next Page
Loading...
