Maestro M111 - Administration Commands; AT#CONFIGDEL

Chapter 3
ADMINISTRATION COMMANDS
3.1 AT#INFO
Returns device information
ALLOWED: exec-state-info
AT#INFO
– (no arguments)
exec :
AT#INFO
#HW_version: M110Series-01V
#Cellular_Module:u-blox-SARA-U201-23.60
#Bootcode_version: mPack_boot_1.0_rc1_b2017112301
#SW_build: mpack_m110_2.1_rc0_2018022601ALPHA01
#FLASH ID: 0xef,0x4015
OK
state :
AT#INFO?
#HW_version: M110Series-01V
#Cellular_Module:u-blox-SARA-U201-23.60
#Bootcode_version: mPack_boot_1.0_rc1_b2017112301
#SW_build: mpack_m110_2.1_rc0_2018022601ALPHA01
#FLASH ID: 0xef,0x4015
OK
info :
AT#INFO=?
OK
3.2 AT#CONFIGDEL
Factory reset device configuration
ALLOWED: exec
Note:
– Device restarts after this command is executed
AT#CONFIGDEL
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd.
Please contact us on support.maestro-wireless.com
13