4.6 AT#VAMODE
Command to set current or voltage mode
ALLOWED: exec-state-info
AT#VAMODE=(channel),(AN_mode)
– channel: 1or 2
– AN_mode: mode within Analogue
• 0: voltage
• 1: current mode
exec :
// Set channel 1 to current mode
AT#VAMODE=1,1
OK
state :
AT#VAMODE?
#VAMODE: 1,0
#VAMODE: 2,0
OK
info :
AT#VAMODE=?
#VAMODE: (1-2),(0-1)
OK
4.7 AT#RDIO
Command to read versatile I/O status
ALLOWED: exec-info
AT#RDIO=(channel)
– channel: 1 or 2
– mode:
• "DI": digital input
• "DO": digital output
• "AN": analogue input
– status:
• for mode = "DI" or "DO" : 0 or 1
20 Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd.
Please contact us on support.maestro-wireless.com
To Next Page
Loading...
