Maestro M111 - 9 D2 Sphere Commands; At#Ipd2 S; At#D2 S

Chapter 9
D2SPHERE COMMANDS
9.1 AT#IPD2S
D2Sphere configuration command
ALLOWED: exec-state-info
Note:
– Device restarts after this exec command is accepted.
AT#IPD2S=(port),(IP-address),(delay)
– port: port on the D2sphere server
– IP-address: IP address of D2sphere server, in IPv4 dotted-notation
– delay: delay to start in seconds. Range 0-43200
exec :
AT#IPD2S=4444,"5.35.253.3",1000
OK
exec :
AT#IPD2S?
#IPD2S: 4444,"5.35.253.3",1000
OK
exec :
AT#IPD2S=?
#IPD2S: (0-65535),(120),(0-43200)
OK
9.2 AT#D2S
Enable or disable D2Sphere function
ALLOWED: exec-state-info
AT#D2S=(mode)
– mode
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd.
Please contact us on support.maestro-wireless.com
41