To Next PageTo Next Page
Need help?Do you have a question about the Maestro M1002G and is the answer not in the manual?
Display the revision details of the SmartPack installed on the Maestro modem.
Provides commands to erase the SmartPack application and reset settings to default.
Enables users to switch between SmartPack and Sierra Wireless WipSoft modes.
Reverts all SmartPack settings to their default values using a single command.
Configures the output port for TCP/IP stack debug messages.
Allows modification of serial port configuration without unplugging the device.
Enables forcing the device LED off to save power.
Sets up cellular network parameters like APN, user name, and password for connection.
Configures TCP and UDP socket parameters for connections.
Sets additional parameters for TCP/UDP connections like keep-alive and packet size.
Visualizes the flow of the automatic TCP/UDP connection process.
Details AT commands for enabling and configuring automatic TCP/UDP connections.
Manages the DLE/ETX character coding for connection termination.
Initiates a TCP connection to a specified server.
Initiates a UDP connection to a specified server.
Configures and executes ICMP Echo Requests to test network connectivity.
Explains how the modem logs into DDNS service providers to update its IP address.
Sets the update server URL and port number for the DDNS service.
Enters the DDNS account login, password, and hostname.
Manages automatic DDNS updates upon IP connection establishment.
Enables sending AT commands remotely via a TCP channel using Telnet.
Configures mode, password, port, and timeout for the TCP terminal.
Details the steps and requirements for sending emails via SMTP.
Sets up SMTP server parameters including port, authentication, and credentials.
Saves, reads, and erases email addresses for sender, recipients, CC, and BCC.
Saves, reads, and erases email subjects for use in outgoing emails.
Saves, reads, and erases email body content for outgoing emails.
Initiates the sending of an email using configured parameters and content.
Explains sending raw TCP messages to a server for M2M communication.
Sets TCP server parameters like address, port, and retry settings.
Saves, reads, and erases socket communication messages.
Sends a message to a pre-saved TCP host with optional content.
Details how the modem interprets AT commands from incoming SMS.
Enables/disables remote AT command execution via SMS and sets password.
Provides important warnings and limitations when using remote AT commands via SMS.
Explains the electrical connection and behavior of I/O ports.
Covers reading digital input status and setting digital output status.
Uses I/O ports as triggers to execute AT commands based on signal conditions.
Configures and enables I/O triggered AT commands with direction and threshold.
Uses the analog input port to trigger AT commands based on voltage levels.
Configures and enables analog triggered AT commands with direction and threshold.
Sets the high and low limits for analog input triggers.
Enables or disables the feature to reject incoming calls based on caller ID.
Manages the list of authorized phone numbers for call screening.
Retrieves the list of authorized phone numbers stored in the modem.
Removes authorized phone numbers from the stored list.
Configures modem status checks in 'one shot' or periodic modes.
Details the operation of 'one shot' and 'periodic' modem status checks.
Configures and enables/disables automatic PIN entry for SIM card unlocking.
Sets the parameters for connecting to an FTP server for application updates.
Informs the modem of the filename and path to download the update file.
Executes the program update process using the downloaded file.
Provides important notes and cautions regarding the remote application update process.
Selects the mode for serial to IP communication, including transparent and converter modes.
Sets the serial configuration for Modbus polling commands.
Provides examples for setting up the M100 as a ModbusTCP to ModbusRTU converter.
Details the structure and fields of a single Command String.
Explains how to combine multiple Command Strings for sequential execution.
Provides the command to execute a Command String directly.
Manages storing, reading, and deleting Command Strings.
Configures phone numbers for receiving Command String SMS messages.
Executes Command Strings based on the modem's real-time clock and alarm settings.
Executes Command Strings when a counter value matches a preset value.
Executes Command Strings when a timer value reaches zero.
Uses I/O board input ports to trigger Command String execution.
Controls the state of output pins using Command Strings.
Sends SMS messages to phone numbers using Command Strings.
Sends emails using Command Strings with configured recipients and content.
Controls modem component power states to save consumption.
Uses analog input signals to control Command String execution.
Sends messages to a TCP host using Command Strings.
Reads current parameters or status of various services using AT+CSTRSTAT.
Manages GPS initialization states, starting modes, and AGPS features.
Details unsolicited messages for GPS and AGPS events.
Provides requirements and setup information for AGPS functionality.
Triggers Command Strings based on GPS events like fix status.
Addresses common questions regarding AutoTCP/UDP functionality.
Answers questions related to AT command driven TCP/UDP connections.
Covers frequently asked questions about remote AT commands via SMS.
Addresses questions about Command String persistence and execution priority.
Example configuration for automatic TCP connection from modem to server.
Example configuration for automatic TCP connection from server to modem.
Example configuration for AT command driven TCP connection.
Notes issues encountered when upgrading firmware versions.
Lists TCP/UDP functions that cannot be enabled simultaneously.
Identifies commands that cannot be sent via SMS.
Details changes and added features for version 097g on R7.50 firmware.
Lists updates and fixes for version 2.2 on R7.52.2 and R7.53.1 firmware.
Details improvements and fixes for version 2.2.2 across multiple firmwares.
Lists changes and fixes for version 2.2.3 across multiple firmwares.
Lists available related documents for M100 series devices.
Lists available related software for M100 series devices.
General
