AI␣1␣TR␣0
Analog input operation mechanism
The Analog Input Service will keep checking the AI once every one second. Depending on Trigger Type (TP) set, the
service will trigger executing Command String if condition fulfilled:
Trigger Type
TP
AI value change from
lower than to higher than
HL value
AI value change from
higher than to lower than
LL value
1 Trigger -
2 - Trigger
3 Trigger Trigger
Note:
– Please read Pulse Counter Plug-in board manual carefully before setup.
– The Service cannot detect AI value change period less than 1s. If the AI value change is less than 1 second
this feature will not be able to detect accurately.
21.10 Socket Communication Service
This service is used to send out a message Email to one saved TCP host, with saved message content plus variable
message. Please read Chapter 9 on page 51 for entering host address and parameters. Up to 10 set of groups
(service type SC, id 1 to 10) can be set with different combinations of "elements": host , message content, etc...
102 Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
support@maestro-wireless.com
To Next Page
Loading...
