Maestro M1002G - Command String GPS Service

23.4 Command string GPS service
The GPS service is used to trigger a Command String when there is a GPS event. Make sure the GPS functionality
is switch on.
There are three GPS events:
Id event
0 From a 2D fix or 3D fix to a no fix
1 From a no fix to a 2D fix
2 From a no fix or 2D fix to 3D fix
23.4.1 GPS Service Command String Syntax and explanation
1st field
Service
type
2nd field
Service
id
3rd field
Operation
type
4th field
Operation argument
Explanation
GP (0 to 2)
TR (1-50)
0
Set Command String to be run, 0 to
cancel setting
Example: When a 2D or 3D fix trigger Command String #10
GP␣1␣TR␣10␣GP␣2␣TR␣10
Invalid Service name or Id will be ignored.
23.4.2 Reading GPS service status
Enter AT+CSTRSTAT="GP 1" will get GPS service #1 info:
GP 1 : SW 0 TH 1 TR 0
a b c d
a. Service id.
b. GPS state:
0 OFF,
1 STOP,
2 START,
3 IDLE,
4 HIBERNATE,
5 DEEP.
c. GPS value:
0 no fix,
1 2D fix,
2 3D fix.
d. Command String id to be executed if trigger (0 if not to trigger).
Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
support@maestro-wireless.com
115