8.5 Email body
AT+EMBODY
To save, read and delete pre-saved email body (content). Up to 3 email bodies with 1024 characters max can be
stored. The <id> field is the id number of the email body to be stored.
To save email body, first enter AT+EMBODY=0,<id> then <ENTER> and wait for "> " prompt. Then simply type email
body content, <Ctrl-Z> (ASCII 26) to finish. This command can be aborted using the <ESC> (ASCII 27) character
when entering text.
Syntax:
AT+EMBODY=<oper>,<id>
text is entered <Ctrl-Z / ESC>
Response:
+EMBODY: <id>
Email body entered
OK
Special syntax for <oper> 0:
AT+EMBODY=0,<id>
text is entered <Ctrl-Z / ESC>
Response:
+EMBODY: <id>,<len>
OK
Defined Values:
<oper> type of operation:
0 store email body to flash.
1 read email body from flash.
2 erase email body from flash.
<id> identification number (id) of the email body. Valid value is 1 to 3.
<len> length (number of characters) of the email body stored.
Example:
Command Response
AT+EMBODY=0,1 >
Note: enter email body with id #1.
This is email body #1<Ctrl-Z> +EMBODY: 1,21
OK
Note: successful stored 21 characters as email
body with id #1.
AT+EMBODY=1,1 +EMBODY: 1
This is email body #1
OK
Note: read stored email body with id #1.
AT+EMBODY=2,1 OK
Note: erase email body with id #1.
AT+EMBODY=? +EMBODY: (0-2),(1-3)
OK
48 Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
support@maestro-wireless.com
To Next Page
Loading...
