Maestro M1002G - Output Port Service; SMS Service

21.5 Output Port Service
Output port Service can control the state of the output pin of I/O ports Command String.
You can control the change of single or multiple input port signals as a condition to trigger Command String execution.
1st field
Service
type
2nd field
Service
id
3rd field
Operation
type
4th field
Operation argument
Explanation
OP 1 or 2
SW 0 to 1 State of the output pin
TR
(1 to 50)
0
Set Command String to be run,
0 to cancel setting
Example: Set the output pin of I/O port #1 to "ON" (1)
OP␣1␣SW␣1
21.6 SMS Service
This service is used to send out a SMS to phone number recorded in the first 10 phone book records in SIM card.
1st field
Service
type
2nd field
Service
id
3rd field
Operation
type
4th field
Operation argument
Explanation
SM (1 to 10)
SN
(SMS content)
Send out the SMS to phone number
inside SIM card
%CTn
%IP
%OP
%TMn
%AI
%PC
%IMEI
%DATE
%TIME
"%" to indicate "variable" options in SMS
content
TR
(1 to 50)
0
Set Command String to be run,
0 to cancel setting
Example: Send a message "ALERT" to phone number store in SIM phone book #1.
SM␣1␣SN␣ALERT
Example: Send a message "Counter#2_value_is_20" to phone number store in SIM phone book #1.
SM␣1␣SN␣Counter#2_value_is_%CT2
Using variable option within SMS content
In the SMS content field you can use "%" and Service type to insert the current value of Service into the SMS content:
Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
support@maestro-wireless.com
97