Maestro M1002G - GPS Information Unsolicited Messages

AT+GPSINFO
To request some unsolicited indication for GPS and AGPS events (+GPSINFO and +APGS unsolicited messages).
See Section 23.2 for details.
Syntax: AT+GPSINFO=<mode>
Response: +GPSINFO: <mode>
Defined Values:
<mode> 1 enable +GPSINFO and +APGS unsolicited messages.
0 disable +GPSINFO and +APGS unsolicited messages. Default value.
Example:
Command Response
AT+GPSINFO=1 OK
Note: enable +GPSINFO and +APGS unsolicited messages.
AT+GPSINFO=0 OK
Note: disable +GPSINFO and +APGS unsolicited messages.
AT+GPSINFO? +GPSINFO: 0
OK
AT+GPSINFO=? +GPSINFO: (0-1)
OK
23.2 GPS Information unsolicited messages
When +GPSINFO is set to 1, following unsolicited message will come out upon GPS events as described below.
Syntax:
+GPSINFO:<event>
+AGPS: <event>[,opt]
+GPSINFO event Explanation
0 GPS fix has been lost.
1 GPS fix has changed to an estimated position
2 GPS fix has changed to 2-Dimensional position
3 GPS fix has changed to 3-Dimensional position
4 GPS fix has changed to invalid position
+AGPS event Explanation
0 Error during EE download
4 EE download started
5 EE download stopped (after AT+AGPS=0)
6 EE download completed (successful)
7 EE download aborted (server access problem)
8 EE download data time stamp display, <opt> will show
<ee-period>, as detailed in 23.1
Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
support@maestro-wireless.com
113