Maestro M1002G - Dynamic DNS Server Configuration; Dynamic DNS Account Setup

6.2 Dynamic DNS server
AT+IPDDNSSERV
Syntax: AT+IPDDNSSERV=<serv_url>,<serv_port>
Response: +IPDDNSSERV: <serv_url>,<serv_port>
Defined Values:
<serv_url> URL of the update server. For example "dynupdate.no-ip.com" for www.noip.com. Check with your
DDNS service provider for correct name.
<serv_port> port number of the update server. For example 80 for www.noip.com. Check with your DDNS service
provider for correct port number.
Example:
Command Response
AT+IPDDNSSERV="members.dyndns.org",80 OK
Note: enter DDNS service provider’s update server information.
AT+IPDDNSSERV? +IPDDNSSERV: "members.dyndns.org",80
OK
AT+IPDDNSSERV=? +IPDDNSSERV: (64),(1-65535)
OK
6.3 Dynamic DNS account
AT+IPDDNSACCT
Syntax: AT+IPDDNSACCT=<hostname>,<login>,<psswd>
Response: OK
Defined Values:
<hostname> Host name to be associated with modem’s IP address. Host name should be registered in an DDNS
account. Maximum length is 64 characters.
<login> Login user name of the DDNS service account. Maximum length is 32 characters.
<psswd> Login password of the DDNS service account. Maximum length is 32 characters.
Example:
Command Response
AT+IPDDNSACCT="mymodem.ddns.net",
"maestro","maestro"
OK
Note: enter DDNS account and host name
info
AT+IPDDNSACCT? +IPDDNSACCT: "mymodem.ddns.net",
"maestro","maestro"
OK
AT+IPDDNSACCT=? +IPDDNSACCT: (64),(32),(32)
OK
40 Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
support@maestro-wireless.com