3 update process unsuccessful (original program will be loaded back).
<ver> version number of existing running SmartPack.
Example:
Command Response
AT+ADINSTALL +ADINSTALL:
2,M1003G_SmartPack_v22_SL8082T_R752_050316
Note: update successful, show existing program version.
AT+ADINSTALL +ADINSTALL:
3,M1003G_SmartPack_v22_SL8082T_R752_050316
Note : update unsuccessful, show existing program version.
AT+ADINSTALL +CME ERROR: 3
Note: update unsuccessful, no update file available.
17.4 Notes and cautions to be taken
– This feature is ONLY for updating new SmartPack application on the modem. Do not use it for downloading
other things. Always contact Maestro Wireless or distributor for correct update file and information.
– If you want to perform update for modem at remote site by AT command over SMS, make sure the feature is
enabled by command AT+SMSAT=1 is entered.
– Make sure you have setup cellular settings by AT+IPGPRS command. When entering AT+FTPDOTA command
the program will make cellular connection automatically if not connected before.
– It is recommended to stop other SmartPack such as Auto TCP/UDP connection during program downloading
and updating.
– Depending on the file size and network condition the download time could be a few minutes up to 30 minutes.
Be patient to wait for response after entering AT+FTPDOTA command.
– Do not use "~" character on file path because it cannot be transferred correctly over SMS.
– No resume function on FTP downloading. The whole file has to be downloaded at one time otherwise the
downloaded data will be discarded.
84 Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
support@maestro-wireless.com
To Next Page
Loading...
