Example:
Command Response
AT+CSNR=1 +CSNR: 1,"12345678"
OK
Note: display authorized number in location 1.
AT+CSNR=1,8 +CSNR: 1,"12345678"
+CSNR: 3,"12345678"
+CSNR: 6,"12345678"
+CSNR: 8,"12345678"
OK
Note: display authorized number in from location 1 to 8.
AT+CSNR=? +CSNR: (1-10)[,(1-10)]
OK
14.4 Erasing authorized phone number list
AT+CSND
This command is to erase authorized phone number entered.
Syntax: AT+CSND=<id1>(,<id2>)
Response: +CSNR: <id>,<num>. . . .
Defined Values:
<id1> beginning location of the authorized phone number to be erased. Valid range is from 1 to 10.
<id2> ending location of the authorized phone number to be erased. Valid range is from 1 to 10.
Example:
Command Response
AT+CSND=1 OK
Note: erase authorized number in location 1.
AT+CSNR=1,8 OK
Note: erase authorized number in from location 1 to 8.
AT+CSND=? +CSND=(1-10)[,(1-10)]
OK
Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
support@maestro-wireless.com
73
To Next Page
Loading...
