Maestro M1002G - Email Address Management

1 authentication with no encryption,
2 authentication used with encrypted user name/password in MIME64 during AUTH LOGIN
phase.
<server> IP address of SMTP server (in xxx.xxx.xxx.xxx format) or an alpha numeric string format (e.g. smtp.server.com).
Maximum 120 characters. Note: if alpha numeric string format is used, make sure the cellular network
has proper DNS service available.
<id> login name of the user. Maximum 64 characters.
<pwd> password for the user. Maximum 64 characters.
Example:
Command Response
AT+IPSMTP=25,1,"smtp.network.com","login","pssd" OK
Note: setup SMTP parameter (using authentication
with no encryption).
AT+IPSMTP=25,0,"smtp.network.com" OK
Note: setup SMTP parameter (no authentication).
AT+IPSMTP? +IPSMTP: 25,0,"smtp.network.com","",""
OK
AT+IPSMTP=? +IPSMTP: (0-65535),(0-2),(120),(64),(64)
OK
8.3 Email address
AT+EMADDR
To save, read and delete email addresses of sender, recipient, CC recipient and BCC recipient.
Syntax: AT+EMADDR=<oper>,<id>,<address>
Response: +EMADDR: <oper>,<id>,<address>
Defined Values:
<oper> type of operation:
0 store email address to flash,
1 read email address from flash,
2 erase email address from flash.
<id> identification number (id) of the email address. Valid value is 0 to 50.
0 id of the sender address (mandatory),
1-50 id of recipient email address.
<address> email address to be stored.
46 Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
support@maestro-wireless.com