– (no arguments)
exec :
AT#CONFIGDEL
OK
3.3 AT#RESET
Software reset the M11X device
ALLOWED: exec
AT#RESET
– (no arguments)
exec :
AT#RESET
OK
3.4 AT#MRST
This command resets the M11x module after a programmed delay. The M11x module will reset cyclically until this
mode is disabled.
ALLOWED: exec-state-info
AT#MRST=(mode),(delay)
– mode: timer reset mode
• 0: disabled
• 1: enabled
– delay: time set to reset the embedded module
• range: "000:01" - "167:59" (format hhh:mm)
– remainTime: time before next reset
• range: "000:01"- "167:59" (format hhh:mm)
exec :
AT#MRST=1,"100:00"
OK
state (1 minute after executing the exec command):
14 Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd.
Please contact us on support.maestro-wireless.com
To Next Page
Loading...
