Name: Magellan 2200VS
Brand: Magellan
Rating: 4 (1 reviews)

To Next Page

To Previous Page

5-118 Magellan

2200VS/2200VS and 2300HS/2300HS

IBM Transmit Labels in Code 39 Format

This feature enables/disables scanner's ability to set a symbology identifier

for a specified label to Code 39 before transmitting that label data to an

IBM host. This applies to: Code 128, Code 93 and Codabar for IBM Port

5B; Code 93 and Codabar for IBM Port 9B.

To enable/disable the IBM Transmit Labels in Code 39 Format feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

bar code.

IBM TRANSMIT LABELS IN CODE 39 FORMAT = DISABLE

IBM TRANSMIT LABELS IN CODE 39 FORMAT = ENABLE

NOTE

When enabled, this feature has no effect on IBM Port 17.

Questions and Answers:

Need help?

Do you have a question about the Magellan 2200VS and is the answer not in the manual?

Magellan 2200VS Specifications

General