Name: Magellan 2200VS
Brand: Magellan
Rating: 4 (1 reviews)

To Next Page

To Previous Page

5-352 Magellan

2200VS/2200VS and 2300HS/2300HS

Codabar Stitching

Enables/disables stitching for Codabar labels. When parts of a Codabar

bar code are presented to the scanner with this feature enabled, the bar

code parts will be assembled by the scanner’s software, and the data will be

decoded if all bar code proofing requirements are met.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

Complete the programming sequence by scanning the SWITCH bar

code.

CODABAR STITCHING = DISABLE

CODABAR STITCHING = ENABLE

NOTE

Codabar Stitching operates using fixed lengths ONLY. Codabar

Length 1 and/or Codabar Length 2 must be properly configured for

stitching to work.

Questions and Answers:

Need help?

Do you have a question about the Magellan 2200VS and is the answer not in the manual?

Magellan 2200VS Specifications

General