Name: Magellan 2200VS
Brand: Magellan
Rating: 4 (1 reviews)

To Next Page

To Previous Page

5-56 Magellan

2200VS/2200VS and 2300HS/2300HS

Motor Timeout

The Motor Timeout feature sets the time for automatically switching the

motor off when the scanner is not in use.

To set the Motor Timeout:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

bar code.

MOTOR TIMEOUT = 5 MINUTES

NOTE

Laser safety requires that the laser switch off before the motor. If you

set the motor timeout shorter than the laser timeout, the motor and the

laser will both shut off when the motor timeout expires.

Questions and Answers:

Need help?

Do you have a question about the Magellan 2200VS and is the answer not in the manual?

Magellan 2200VS Specifications

General